Autore Topic: Burnishing with oil  (Letto 2440 volte)

0 Utenti e 1 Visitatore stanno visualizzando questo topic.

kenpachi zarachi

  • Visitatore
Burnishing with oil
« il: 15 Luglio 2013, 06:12:36 pm »
Don’t think it will be a hard work ,it is really easy
Ingredients :
A guard ready to be fitted ,final size and final finishing with 500 grit sandpaper,
Make sure you remove grease from the guard with aceton or nitro diluent .
I forgot to do that

a blow torch and seed oil ( it is the same I use for quenching)

Holding the guard with a grapple  I start heating with the blow torch

up to a Blue /violet color

I sink it in oil

And heat again

If something goes wrong , you can repeat the step ( Heating sinking ) until then you reach
The outcome you desire
I cool down the guard in water then I remove the remains of burnt oil with a mix of powder soap
Washing up liquid  for having a abrasihive and degreasing paste .
I think it can be also ok a home using  grease remover

rinse it with water and accurately dry. Here here the result

In this way you have  a quite tough result  , I didn’t test it  , but the burnishing is wool steel resistant and sufficiently prevent the formation of rust .
This method is suitable for  high carbon steel , iron  .
As you can see  the brass part is lightly burnished , so this method is NOT useful for brass , bronze and  stainless steel
If you want a  more shiny surface , just mirror polish the guard before heating and sinking
For obtaining a consistent effect , equally heat the guard .
If you want to have a tortoise shell effect heat in a random / spot way , in this way youl will have different shade of colours : Blue violet , yellow
For an aged effect polish the guard with 1000 grit wet paper and wool steel .
 
 
« Ultima modifica: 15 Luglio 2013, 06:23:59 pm da kenpachi zarachi »

Offline Simone Foglia

  • Trombaspose
  • ********
  • Post: 2.251
  • A fat bald dude with a bad temper.
Re:Burnishing with oil
« Risposta #1 il: 15 Luglio 2013, 06:38:01 pm »
Ottima traduzione!
Simone Foglia

https://www.facebook.com/simone.g.foglia
http://sfknives.blogspot.it/

"La libertà non è star sopra un albero
 non è neanche avere un’opinione
 la libertà non è uno spazio libero
 libertà è partecipazione." G.G.